Home well water systems

[nykym]

1. You could look at the

Pressure switch the little gray boxy thing near your bladder.
Sometimes the contact get pitted and worn out and the switch will or will not turn on.
Best to replace than try to clean up.
The other part to look at would be the unit that the pressure switch is wired to (i can't remember the name of it).
Mine is about 6=7" tall x 5" wide and about 3-4" deep, small gray box. front lifts off (there may be a screw or 2 holding it on.
There is a big capacitor in there so make sure you turn off the power and don't touch the bare contacts.
check to see if the spade terminals on the capacitor are corroded if so replace the unit. Costs about $60 to whatever.
Anyway that,s my 2 cents.